Reach Truck FM-X

Safety in the warehouse is increased thanks to an acoustic signal during reversing. Colleagues are therefore able to notice the forklift truck even if they have their back to it.

With the breathalyser, the driver has to carry out an alcohol breath test before they can operate the truck. The truck is only released once the test has been passed. The advantage of the test is that it is very difficult to manipulate the results and can help to prevent accidents. Thanks to interchangeable mouthpieces, it is hygienically safe.

The broadband alarm is an audible alarm that emits a broadband signal tone. Over longer distances, the tone is drowned out by ambient noise. However, in the immediate environment the noise and thus the source of danger are very easy to locate. This increases awareness of the truck and prevents accidents.

The protective grille roof is available in a low or high version, according to the height of the passageways. It protects the driver from falling loads.

Real-time person detection for maximum rear area safety The AI-powered camera system detects people and person-like objects in the rear area in real time. It provides multi-level warnings and can intervene automatically when necessary – for enhanced safety when reversing.

• Real-time detection of people and person-like objects
• Multi-level alerts via monitor and sound
• Automatic speed reduction and stop function
• Customizable detection zones and warning mechanisms
• Operating range from -40 °C to +85 °C

Keeping the goods in place: the load backrest stabilises the transported goods at the fork carriage back so that they can be securely transported from A to B.

A flashing, warning or rotating light increases safety at the warehouse and makes other employees working in the warehouse aware of the forklift truck via a flashing yellow light signal. If preferred, this can be set to only light up when reversing. The use of this light increases safety particularly in areas where hearing protection is required to be worn. The rotating light is available in various designs and can be mounted on or behind the overhead guard.

If desired, you can limit the usage of your forklift truck to specific persons or groups of persons via access authorisation. Select whether the release of the truck should be carried out using a key switch or via a digicode system with ten configurable access codes (or PINs).

Digicode systems (PIN) are an easy way to prevent unauthorised use of the truck. The truck can be started up quickly and easily, simply by entering the PIN code. This allows the user to limit access authorisation to specific individuals or groups. It is possible to configure up to ten PIN codes.

Sit back and relax:

The optional tilt seat for the FM-X noticeably increases the ergonomics of the driver’s work space. The tilt seat is easy to operate and protects the driver's back and neck while working. It also improves visibility when climbing in and out.

Optimal visibility at all times: the optional panoramic overhead guard with armoured glass window provides improved visibility when storing and retrieving goods. It works entirely without the need for struts and of course meets all the safety standards of a standard overhead guard.

Always at the right height:

The height of the seat and the foot plate can be proportionately adjusted. Individual comfort settings can therefore be configured for different operators to ensure fatigue-free driving. The shock absorption in the driver’s work space protects back muscles on uneven floors and at thresholds.

No wobble here

The FM-X is always more than just a fork ahead of the rest. Thanks to Active Load Stabilising (ALS) you can be dealing with the next goods transport while others have to wait for the mask to stop vibrating. An automatic equalising pulse provides a fast and effective way of stopping the vibrations from occurring at great heights, reducing the waiting time at the shelf by up to 80%. The result is a significant increase in turnaround speed.

Automatic speed adjustment for curves

The speed limiter controlled by steering angle reduces possible damage to goods by adapting to an appropriate cornering speed. This assistance function is available for various forklift trucks and warehouse technology devices, and regulates the driving speed automatically according to the steering angle. In other words, the driver doesn’t need to worry about speed when cornering. The truck automatically decelerates precisely as much as necessary for the operator to drive as safely but as quickly as possible.

With the help of the optional LED lift height sensor (standard on the FM-X), the lift height display ensures maximum precision from the very first millimetre. This means that operators always know the height of the fork tips and can navigate precisely to avoid touching the rack when picking up the pallet. The system works with a repeatability of less than +/- 5 mm and the lift height is permanently shown to the drivers on the display.

The ceiling sensor detects low ceiling heights and prompts the driver to reduce their speed in order to promote general work safety in the warehouse. It comprises an ultrasonic sensor on the roof of the truck, which detects ceilings up to a height of 20 m. Depending on the sensor signal, the maximum speed is controlled, whereby the standard speed is 6 km/h.

Who can use which forklift truck for which area of application? How fast may a certain driver travel in the industrial truck?

The solution: our smart driver profiles in STILL Smart Portal. This web-based application allows the features of the truck to be adapted to the operator’s requirements, such as a reduction in travel, lifting or tilting speed or automatic activation of the lights.

The right driving programme for all requirements: the operator can choose between three established and two freely configurable driving programmes in the three operating modes: Blue-Q, normal and sprint mode. The driving programmes can be chosen according to the situation in order to achieve the maximum performance or energy efficiency.

Intelligent autopilot: the forklift’s Blue-Q (blue button) efficiency mode is activated at the touch of a button. An intelligent optimisation characteristic in the drive saves energy precisely where it is not impacted by the work process.

Up to 10% savings in energy consumption depending on the use profile and forklift equipment.

Let nothing slide, even at great heights: the pallet is moved to a 90° position at the touch of a button. This makes extending and retracting the forks from the pallet a breeze even at the top shelf levels.

Maximum handling capacity: STILL OptiSpeed

The package comprises comprehensive hardware and software assistance systems which optimise the movements of the truck regardless of the load. This significantly increases handling capacity. OptiSpeed uses software to determine optimum fork and travel movements depending on the lifting height. The system offers continuous adjustment of the driving speed in the aisle, independent of the lifting height. This ensures added volume capacity, comfort and safety.

The OptiSpeed 3.3 variant combines the advantages of previous variants with a weight sensor: in addition to the visual and acoustic signals when specific limit values are reached, a travel and lift stop is triggered when the permissible load weight is exceeded. The system calculates ideal transport movements and optimises them based on the lifting height and load. That enables higher speeds on empty runs or when loading and picking.

Process safety at every lift height

The OptiSpeed driver assistance system reduces mast vibrations to a minimum for medium lifting heights and enables quick goods handling.

OptiSpeed cannot be combined with the ‘Active Load Stabilisation’ driver assistance system.

The forklift truck travels at creep speed (5 km/h) with a defined lift height. This significantly reduces the risk of an accident as the driver has sufficient time to react promptly in the event of a hazardous situation.

Leave nothing hanging on the balance: the system integrated in the FM-X reach truck virtually eliminates the risk of damaging goods when lifting pallets. The advantage of the shift and lowering lock is that pallets that have been lifted crookedly or diagonally lie on the wheel arms when they are lowered, and will therefore be tilted or pushed when pulling in the fork. The operator must always approve this for safety and is advised to check that the goods have been picked up correctly.

Autostop before ground contact:

When forks hit the ground, it's not pleasant for the ears, the floor or the forklift. But on the other hand, would it not be very pleasant if this would not happen in the first place? That's exactly why we developed the electric fork wear protection for you. When the assistance system is activated, it ensures that the forks cannot touch the ground during lowering. Shortly before that, they stop automatically - exactly so that you can thread them perfectly into the pallet. Forks dragging on the ground due to accidental startup in the lowered state are also a thing of the past.

The automatic parking brake is applied automatically or at the push of a button, and prevents the truck from rolling. The electrohydraulic spring-loaded brake locks whenever the truck stops.

Forks up, speed down:

More safety, less product breakage and ensuring proper vehicle use - these are the benefits offered by the Speed Reduction assistance system when the fork carriage is raised. As soon as the forks reach a height of 500 mm (or another defined threshold), the speed of the vehicle is automatically reduced. Even if a driver forgets that he should not drive with the load raised, the assistance system slows him down, guaranteeing safe handling of the load and vehicle.

These LED headlights improve the lighting conditions to the sides of the tuck and reduce the glare effect as they do not reflect off the mast from behind. This way, higher rack areas are also illuminated.

Lifting heavy? Glide gently!

Gentle and jerk-free lifting and lowering processes become a reality with the mast transition damping and end stop damping. The assistance system automatically adjusts the lifting and lowering speed before the mast transitions. As a result, the inner masts glide smoothly out of the outer mast and back again, protecting the load from jerking. Also, before reaching the lifting stops, the system automatically adjusts the speed so that the end position is also reached smoothly and without jerk.

Everything in view, all the time: the FM-X can optionally be equipped with a camera system which significantly facilitates operation and improves visibility.

The panoramic mirror, which can be mounted on the left or right side of the truck, improves visibility and reduces the size of the blind spot by expanding the field of vision. Drivers are able to get a quick overview of what’s behind them, allowing them to work more safely.

Safe operation at all times: the LED daytime driving light ensures that the forklift truck is always clearly visible even in darker areas. A daytime driving light is available for various trucks.